Brick Cleaning is one of the jobs we do most often in Maricopa, AZ. Typical jobs cost $250-$700, and you approve the price before we begin.
Method and pressure
When to book brick cleaning
- Green or black growth on shaded brick
- White powdery deposits (efflorescence)
- Soot on chimneys
- Mortar haze or paint drips
Where the grime comes from
- Shade and moisture
- Salts carried to the surface by water
- Soot and smoke
- Sprinkler water hitting the wall
Safe steps for homeowners
- Brush off dry efflorescence with a stiff brush before wetting it
- Fix gutters and downspouts that soak the brick
- Look for cracked or missing mortar before washing
Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.
What can go wrong with DIY pressure washing
- Eroding mortar joints with high pressure
- Driving water into old, soft brick
- Using acid without pre-wetting, which can burn the brick
How we handle brick cleaning
- Inspect brick and mortar condition
- Pre-wet and protect nearby surfaces
- Apply the right masonry cleaner or soft wash
- Rinse at low pressure
- Check for remaining stains and treat as needed
Typical brick cleaning prices
What moves the price:
- Size: square footage of siding, roof or flatwork
- Condition: heavy growth, old stains and peeling finishes take longer
- Access: number of stories, roof pitch, slopes and how close we can park
- Add-ons: sealing, gutter brightening and other services done in the same trip
These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.
Serving Maricopa, AZ and nearby towns
In Arizona, siding and stucco get dull from dust and spotted from sprinkler overspray more than from mildew. Hard-water spots need a different treatment than dirt, so we identify the stain before choosing the cleaner.
Much of Arizona has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.
Some cities in Arizona limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.
Crews serve all of Maricopa (ZIP codes 85138 and 85139), plus Sun Lakes (14.5 mi), Sacaton (17.9 mi), Chandler (20.9 mi) and Casa Grande (20.9 mi). Call (555) 010-0000 for a free quote in Maricopa.
Brick Cleaning: frequently asked questions
How much does brick cleaning cost in Maricopa, AZ?
Brick Cleaning typically costs $250-$700 for a typical brick home front or chimney, and usually takes 2-4 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.
Do you use high pressure for brick cleaning?
Brick Cleaning is done with low-pressure wash and masonry cleaners. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.
Is brick cleaning safe for my plants and pets?
We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.
How often should I schedule brick cleaning?
Every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.
What if it rains on the day?
Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.